Replacing Ink Cartridges - Epson WorkForce 435 Quick Manual

Replacing Ink Cartridges

Make sure you have a new ink cartridge before you begin.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
1. Turn on the product.
2. If an ink cartridge is low or expended, you see a
message on the LCD screen indicating which color to
replace. Press
If you're replacing a cartridge before you see a message on the LCD screen, press
, press u or d to select
Menu
x
Cartridge Replacement
3. Open the scanner, then open the cartridge cover.
4. Squeeze the tab on the cartridge and lift it up. Dispose of it carefully. Do not take the
used cartridge apart or try to refill it.
Warning: If ink gets on your skin, wash the area thoroughly with soap and water. If
ink gets into your eyes, flush them immediately with water. If discomfort or vision
problems continue after a thorough flushing, see a doctor immediately. If ink gets
into your mouth, spit it out immediately and see a doctor right away.
5. Before you open the new cartridge package, shake it gently four or five times. Then
remove it from the package.
24
Replacing Ink Cartridges
.
OK
Maintenance
and press
, and press
.
OK
. Then select
OK Ink