Osd Menu Configurations; No Signal Display; Osd Menu Selection; Picture Menu - Samsung SMT-1934 User Manual

USER'S MANUAL USER'S MANUAL

OSD Menu Configurations

No Signal Display

When there is no connection at the VGA .
HDMI input, the On Screen Display will show this message.
No Signal
<Video mode>
Check signal cable
<VGA.HDMI mode>

OSD Menu Selection

1. Press the MENU button to see the main menu.
2. Press / and ENTER button to select the main
menu.
3. Press / and ENTER (or
sub menu.
4. Press / and ENTER (or
setting. (Or press /
5. Press the MENU button to exit.
NOTE1: Press the button to return to the
previous screen.
Press the MENU button to exit .
NOTE2: The OSD display will be disapear after 1
minutes if there is no button input.
Video and
) button to select the
) button to select
button to select setting)

Picture Menu

Mode : Dynamic, Standard, Movie
Mode
Backlight
Contrast
Brightness
Sharpness
Screen
Auto Adjustment
Advanced Settings
More
Move
Mode
Backlight
Contrast
Brightness
Sharpness
Screen
Auto Adjustment
Advanced
More
1. Press the MENU button to select the
Picture menu.
2. Press the ENTER or
menu.
3. Press the ENTER or
4. Press the / and ENTER button to select the
mode you want. (Dynamic, Standard, Movie )
5. Press the MENU button to exit.
You can return to the factory defaults picture
settings by selecting the "Reset".
Custom : Backlight,Contrast,Brightness,
Sharpness
Mode
Backlight
Contrast
Brightness
Sharpness
Screen
Auto Adjustment
Advanced
More
Move
1. Press the MENU button to select the
Picture menu.
2. Press the ENTER or
3. Press the / button to select the setting you want.
(Backlight,Contrast,Brightness,Sharpness)
Press the ENTER button.
- 9 -
Picture
: Dynamic
10
100
45
50
Enter Return
Picture
:
Dynamic
0
Standard
Movie 0 0
45
50
Settings
Move Enter Return
button to select the Mode
button.
Picture
: Dynamic
10
100
45
50
Settings
Enter Return
button.