Safety Signs - New Holland CornMaster 9208-22 Service Manual

Safety signs

Row Unit Drive and Chopper Drive
Signs shown are for a corn header with a row unit drive system.
The following safety signs are on your machine as a guide for your safety and for the safety of those working with you.
Walk around the machine and note the content and the location of all safety signs before you operate your machine.
Keep safety signs clean and legible. Clean safety signs with a soft cloth, water, and a gentle detergent.
NOTICE: Do not use solvent, gasoline, or other harsh chemicals. Solvents, gasoline, and other harsh chemicals may
damage or remove safety signs.
Replace all safety signs that are damaged, missing, painted over, or illegible. If a safety sign is on a part you or your
dealer replaces, make sure that you or your NEW HOLLAND NEW HOLLANDdealer install the safety sign on the new
part. See your NEW HOLLAND dealer for replacement safety signs.
NOTE: Call outs on this page refer to decals as numbered on the following pages.
INTRODUCTION
Safety signs that display the "Read Operator's Manual" symbol are intended to direct
the operator to the operator's manual for further information regarding maintenance,
adjustments, or procedures for particular areas of the machine. When a safety sign
displays this symbol, refer to the appropriate page of the operator's manual.
Safety signs that display the "Read service manual" symbol direct you to the service
manual. If you doubt your ability to perform service operations, contact your dealer.
NHIL17MH00166AA
Rear – Non-chopping
51510606 27/07/2018
1
9