Yamaha NIKEN MXT850 Owner's Manual page 31

 After resetting, "– –.–" will be
shown until the vehicle has trav-
eled a sufficient distance.
 The display units cannot be
switched between "km/L", "L/100
km", and "MPG" in this mode;
change to the instantaneous fuel
consumption mode first.
Coolant temperature
1
1. Coolant temperature display
The temperature of the engine coolant
from 40 °C to 124 °C is shown in 1 °C
increments.
If the message "Hi" flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 6-36.)
Instrument and control functions
TIP
 When the coolant temperature is
below 40 °C, "Lo" will be dis-
played.
 The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
1
1. Air temperature display
The temperature of the air drawn into
the intake system from –9 °C to 50 °C
is shown in 1 °C increments.
TIP
 –9 °C will be displayed even if the
air temperature falls below –9 °C.
3-16
 The temperature displayed may
vary from the actual ambient tem-
perature.
Brightness and shift light control
mode
1
1. Brightness level display
This mode cycles through five control
functions in the order listed below.
 Display brightness
 Shift light on / flash / off
 Shift light on r/min
 Shift light off r/min
 Shift light brightness
TIP
The brightness level display shows the
selected brightness level.
3