[Tv Connection] L - Panasonic Lumix S1R Operating Instructions Manual

[IN/OUT]
[TV Connection]
[HDMI Mode
(Playback)]
Sets the output resolution during HDMI connection.
[AUTO]: Outputs images at an output resolution suited to
the connected TV.
If no image appears on the TV with [AUTO], switch to a
0
constant setting other than [AUTO] to set a format
supported by your TV.
(Refer to the operating instructions for the TV.)
Even when [4K/50p] or [4K/25p] is set, MP4 videos
0
recorded with [4K/LPCM/150M/60p] or [4K/100M/30p] will
be output at a resolution of [4K/60p] or [4K/30p].
Even when [576p] is set, depending on the connected TV,
0
images will be output at a resolution of [480p].
[HLG View Assist
(HDMI)]
At recording or playback of [HLG Photo], this converts its
colour gamut and brightness for display.
This is linked with [HDMI] in [HLG View Assist] under the
0
[Custom] ([Monitor / Display]) menu.
For details, refer to page 347.
[VIERA Link (CEC)]
You can use the device remote control to operate the
camera when it is connected to a VIERA Link compatible
device using an HDMI cable.
For details, refer to page 428.
0
[AUTO]/[4K/50p]/[4K/25p]/[1080p]/
[1080i]/[720p]/[576p]
[AUTO]/[MODE1]/[MODE2]/[OFF]
[ON]/ [OFF]
14. Menu Guide
357