Using Auto Correct - Epson Stylus CX7800 Basic Manual

4. Press the paper type button to select
you loaded).
If you select
Plain Paper
Photo Paper
5. Press the paper size button to select
6. Press the x
Start
Note:
To cancel printing, press the y Stop/Clear Settings button.
7. When you are done printing, remove the memory card by pulling it straight
out of its slot.

Using Auto Correct

With Auto Correct you can print using the P.I.M. (PRINT Image Matching
Exif Print data stored in your photos, or print using the PhotoEnhance
1. Press the
Setup/Utilities
2. Press the l or r
the x button.
Start
3. Press the u or d
■
Prints using PRINT Image Matching. (Automatically selected
P.I.M.:
when your photos contain P.I.M. data.) If the photo does not include
P.I.M. data, try printing with PhotoEnhance.
■
PhotoEnhance:
little longer, but provides better quality.
■
Prints using Exif Print. (Automatically selected when your pictures
Exif:
contain Exif data.) If the photo doesn't include Exif Print data, try using
PhotoEnhance.
■
No automatic correction is used.
OFF:
4. Press the x
Start
5. Press the
Setup/Utilities
Then follow the steps in the previous sections to print your photos.
, the photos print with a white border. If you select
, the photos print borderless, to the edge of the paper.
button to start printing.
button.
Photo/Options
button to select one of the following modes:
Copies
Enhances photos automatically. This selection takes a
button to confirm your selection.
button to return to the previous mode.
or
Plain Paper
, , or
Letter 4"x 6"
button to select
Auto Correct
Printing From a Memory Card
(whichever
Photo Paper
.
5"x 7"
™
setting.
. Then press
®
) or
25