Inserting The Card - Epson Stylus CX7800 Basic Manual

Inserting the Card

1. Make sure the Epson Stylus CX7800 is turned on.
Note:
When you print directly from a memory card, it is best if the Epson Stylus CX7800
is not connected to your computer (or your computer is turned off).
2. Open the memory card door.
3. Make sure the memory card access light is off and that no cards are in any of
the slots, then insert your card into the correct slot.
The memory card access light flashes and then stays on.
4. Close the memory card door. Now you can:
■
Print an index sheet so you can select which photos to print (page 22)
■
Print all the photos on the card (page 24)
■
Print photos pre-selected on your camera using DPOF (page 24)
Note:
You can print only in color when printing directly from a memory card; you cannot print
in black and white.
When you want to remove the card, make sure the memory card access light is not
flashing, then pull the card straight out of its slot.
Caution:
Do not remove the card or turn off the Epson Stylus CX7800 while the memory card
access light is flashing; you may lose data on the card.
20
Printing From a Memory Card
Memory card
access light