Lights - Epson Stylus CX7300 Series Basic Operation Manual

Lights

a
b
c
d
e
f
O = on k = flashing
Light Pattern
P On
a
O
k (slow)
b O or k
b
c
B k
O
k Copies d
d
(window)
1 to 9
E
H
P
-
e l [A4 Plain
O
Paper]
f g [10×15/
O
4"×6"
Photo
Paper]
Status
The printer is on.
The printer is active, turning off, or turning on.
An error has occurred (& "Solving Problems"
on page 20).
An ink cartridge is low. You can continue
copying until it is expended.
An ink cartridge is expended or missing.
Memory card printing option is in DPOF
mode.
Indicates the number of copies.
The printer continues to copy until the paper
you loaded runs out. You can load up to 100
sheets.
An error has occurred.
An unsupported device (HUB) is connected.
Flashes when a camera with PictBridge data
is connected. When the connected device is
not supported, the P and the b error light
double-flash.
The printer enters "sleep" mode when no
buttons are pressed for 13 minutes. Press any
button (except the P On button) to "wake" it.
Indicates that this paper size/type is selected.
Indicates that this paper size/type is selected.
Control Panel Functions
5