Cadillac Automobile Owner's Manual page 266

1. Press and hold /
two seconds.
2. Say Dial or Call.
3. Say the entire number without
pausing, or say the name tag.
Once connected, the person called
will be heard through the audio
speakers.
The digit dial command allows a
phone number to be dialed by
entering the digits one at a time.
After each digit is entered, the
system repeats back the digit it
heard followed by a tone.
If an unwanted number is
recognized by the system, say
Clear at any time to clear the last
number.
To hear all of the numbers
recognized by the system, say
Verify at any time.
for
1. Press and hold
two seconds.
2. Say Digit Dial.
3. Say each digit, one at a time,
that you want to dial. After each
digit is entered, the system
repeats back the digit it heard
followed by a tone. After the last
digit has been entered,
say Dial.
Once connected, the person called
will be heard through the audio
speakers.
1. Press and hold
two seconds.
2. After the tone, say Re dial.
Once connected, the person called
will be heard through the audio
speakers.
When an incoming call is received,
the audio system mutes and a ring
tone is heard in the vehicle.
/ for
Press
Press
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
Press
incoming call when another call
is active. The original call is
placed on hold.
Press
the original call.
/ for
To ignore the incoming call, no
action is required.
Press
current call and switch to the call
on hold.
/ to answer the call.
/ to ignore a call.
/ to answer an
/ again to return to
/ to disconnect the