Cadillac Automobile Owner's Manual page 260

The following list shows all of the
voice commands available for the
navigation system with a brief
description of each. The commands
are listed with the optional words in
brackets. To use the voice
commands, refer to the instructions
listed previously.
The following are voice tag
commands that can be accessed by
clearly stating the commands
exactly as they are written. There
are up to 40 voice tag entries for
destinations.
These
commands instruct the system to
select a destination saved under the
voice tag you have stored. The
system prompts for a destination
name then waits for you to state
the name.
If not currently driving on a route,
the system automatically creates the
voice tag destination as the final
destination. If driving on a route, the
system automatically creates the
voice tag destination as a stopover.
Up to three stopovers can be
created.
From the address book entry
information page, press the Add
Voice tag screen button. The
system responds Name Please?
and you will have four seconds to
record a name. The system asks for
confirmation of the name before
saving it as a voice tag.
This command instructs the system
to assist with navigation commands.
Use the following display commands
to set the display mode.
display to daytime mode.
the display to night mode.
the display to automatic mode. The
system changes between day and
night mode automatically.
to assist with display commands.
The following are radio commands
that can be accessed by clearly
stating the commands exactly as
they are written.
go to either the AM, FM, or XM (if
equipped).
Instructs the system to go to a
specific frequency on either AM
Sets the
or FM.
Sets
Sets
Instructs the system
Instructs the system to