General Information
FIG. 23: Fertilizer Opener
One grease fitting (1) on the lower parallel arm. (8 hours)
Two grease fitting (2) on the pivot casting. (8 hours)
One grease fitting (3) on the hub bearing. (8 hours)
FIG. 24: Fertilizer Pump plugs and grease fitting.
Check/Fill Plug (1), (8 hours)
Drain Plug (2), (8 hours)
Shaft Bearing (3), (8 hours)
One grease fitting (4). Fill until the lubricant is forced out of
the bottom. (8 hours)
FIG. 25: Inner Section Hinge (1) of the markers.
(8 hours)
FIG. 26: Middle Section Hinge (1) of the markers.
(8 hours)
01-18
1
3
FIG. 23
FIG. 24
FIG. 25
FIG. 26
G807003
1
4
3
2
634637
1
J415091
1
GA29540
4283528M1
2