Epson AcuLaser CX11N Setup Manual page 12

2. Remove the photoconductor from its package and pull off the protective sheet.
Caution:
Do not touch the belt on the top of the photoconductor or the blue roller beneath
it; otherwise, print quality may decrease.
Avoid exposing the photoconductor to light any longer than necessary.
Do not touch any other components inside the CX11N.
3. Hold the photoconductor by its handle and insert it into the slots marked with
blue arrows inside the CX11N. Push it in until it clicks into place.
4. Flip down the orange lever, then close cover B.
5. Expand the extension tray if necessary. Lower the scanner unit to the original
position.
12
Setup