Products For Locking And Sealing - MASSEY FERGUSON MF400Xtra Workshop Manual

G. Products for locking and sealing
Loctite 241/242: Threadlocking liquid with
medium strength against disassembly for nuts
and bolts.
Threadlocking liquid with medium strength against
disassembly for nuts and bolts. Simplifies assembly,
eliminates mechanical locking systems, prevents
loosening through vibration, prevents corrosion and
rusting, prevents leakage, eliminates retightening
and permits disassembly with standard tools.
Loctite 277: High strength threadlocker for
nuts, bolts and studs.
Simplifies assembly, eliminates mechanical locking
systems, prevents loosening through vibration,
prevents corrosion and rusting, prevents leakage,
eliminates retightening.
Allows disassembly with standard tools.
Loctite 290: Loctite 290 Locks and seals bolts
after assembly
Penetrates by capillary action, filling all empty
spaces. Eliminates mechanical locking systems,
prevents loosening through vibration, prevents
corrosion and rusting, prevents leakage, eliminates
retightening and seals micropores.
Allows disassembly with standard tools.
Loctite 567: Seals threads with Teflon
For any threaded assembly. Prevents clogging, does
not contaminate the system, instantly seals NPT
connections to 17 bar (250 psi). Simplifies
positioning of parts and equipment such as
connections.
Loctite 601: Fastens bearings, bushings and
other cylindrical parts
Allows assembly by sliding parts into place and
prevents corrosion between parts. Eliminates
necessity for polished finish of parts; disassembly
with standard tools.
Loctite 660: Fastens bearings and bushings
with large clearance, woodruff key, etc.
Fills larger gaps, not requiring plane surfaces.
Fastens and seals parts.
Allows disassembly with standard tools.
MF 400 Xtra
.
®
Liquid gaskets
If there is no risk of oil contamination, you can use
Loctite 515, 598, 599 or Three Bond.
However, when bonding housings containing oil, we
recommend you apply degreaser Loctite 7070 in the
entire surface and only after apply a continuous
thread of Loctite 509 along the entire surface.
Failure to comply with these recommendations will
contaminate the oil and clog the filters.
Examples: hydraulic cover, mounted on central
housing, upper covers of all gearboxes and union
of gearbox housing with central housing (rear axle).
Introduction
01
01A01-23