Too Warm/Too Cold - Viessmann Vitocal 300 Operating Instructions For The System User

Heat pump/heating circuit settings

Too warm/too cold

If your accommodation is colder/hotter than the room temperature you have
entered, select the menu "Too warm/too cold".
Here you can influence the heat pump or heating circuit curves.
Check before modifying the curve(s), whether the operating mode and
switching times are correctly set.
Only make further modifications using this menu 24 hours later, to take
account of the system inertia.
Press the following keys:
1. C for "Program".
2. for "Heat pump"
A
or
C for "Mixer 1".
3. / until "Too warm/ too
cold" is highlighted.
>>>
4. the "Matching the
curve" menu is shown.
Matching the curve
Set room temperature
.5
Enter current room temp.
Actual room temperature
Room temp. will change by +2.0
+0.1 0.1
16
5.
+0.1
6. OK
= 20.0
= 18.0
OK
/ until the actual return
0.1
temperature appears.
The current room
temperature will
already be shown in
the display, if a remote
control unit with room
temperature sensor is
connected.
to confirm;
the control unit now
calculates a new curve.
Your room temperature
is then matched to the
required value.