Cadillac 2011 DTS Owner's Manual page 250

The radio clock and analog clock are not synchronized.
Occasionally you might need to set the digital radio
clock using the procedure below to synchronize both
clocks.
To turn the radio clock display on or off:
1. Turn the radio on.
2. Press the MENU button until
3. Press the pushbutton located under
clock and date settings appear.
4. Press the pushbutton located under the forward
arrow tab until the menu for default clock and date
settings appear.
5. Press the pushbutton located under the currently
displayed status of either ON or OFF. The ON
display indicates the radio clock display is disabled
and the OFF display indicates the radio clock
display is enabled. Press this pushbutton to toggle
the radio clock display on or off.
If the radio clock display is turned on, the screen
displays Radio Clock ON for 10 seconds, then
returns to the original clock display menu.
4-88
is displayed
until the
If the radio clock display is turned off, the screen
displays Radio Clock OFF for 10 seconds. The
menus for clock and date settings are removed,
and ON displays as a current status indicating that
the clock display can be turned on, if desired.
This type of radio has a
and date. To set the time and date:
1. Turn the radio on.
2. Press and HR, MIN, MM, DD, YYYY (hour,
minute, month, day, and year) displays.
3. Press the pushbutton located under any one of
the tabs that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
Another way to increase the time or date, is to
press the right SEEK arrow or the
button.
To decrease the time or date, press the left
SEEK arrow or the
also turn the
right side of the radio faceplate, to adjust the
selected setting.
button for setting the time
FWD
REV button. You can
knob, located on the upper