Procedure For Dual Station Models (Main Station); Procedure For Dual Station Models (Sub Station); Trimming Outboard Motor - Yamaha F250B Owner's Manual

Operation
ON
OFF OFF
2. Remove the key if the boat will be left un-
attended.
TIP:
The engine can also be stopped by pulling the
cord and removing the clip from the engine
shut-off switch, then turning the main switch
to " " (off).
EMU35930
Procedure for dual station models
(main station)
1. The procedure until stopping the engine
is the same as that of the single station
models.
2. Remove the key if the boat will be left un-
attended.
TIP:
The engine can also be stopped by pulling the
cord and removing the clip from the engine
shut-off switch, then turning the main switch
to " " (off).
EMU35910
Procedure for dual station models
(sub station)
Push and hold the red engine stop button until
the engine comes to a complete stop. When
the engine has been stopped from the sub
station, be sure to turn the main switch on the
main station to "
74
ON ON
OFF
ZMU06014
".
TIP:
The engine can also be stopped by pulling the
engine shut-off cord and removing the clip
from the engine shut-off switch.
EMU27862

Trimming outboard motor

EWM00740
WARNING
Excessive trim for the operating condi-
tions (either trim up or trim down) can
cause boat instability and can make steer-
ZMU05986
ZMU05987
ZMU05988