Stowing The Deflated Road Wheel; Tire Pressure Reset Procedure - Lexus ES300h Towing And Road Service Manual

Hide thumbs Also See for ES300h:
Table of Contents

Advertisement

STOWING THE DEFLATED ROAD WHEEL:

The deflated road wheel can be stored in the rear cargo area in the same location as the spare wheel. Use
caution not to damage the wheel nor pinch your hand between the wheel and the trunk surface when stowing
the deflated tire. The center wheel ornament will need to be removed from the road wheel in order to secure
the wheel in the rear cargo area.
After completing the tire change
The tire pressure warning system must be reset.
How to initialize the tire pressure warning system:
1. Park the vehicle in a safe place and turn the "POWER" switch off. Initialization cannot be performed
while the vehicle is moving.
2. Adjust the tire inflation pressure to the specified cold tire inflation pressure level. Make sure to
adjust the tire pressure to the specified cold tire inflation pressure level. The tire pressure warning
system will operate based on this pressure level.
3. Turn the "POWER" switch to ON mode.
4. Press and hold the tire pressure warning reset switch until the tire pressure warning light flashes
slowly three times (Figure 13).
5. Wait for a few minutes with the "POWER" switch in ON mode and then turn the "POWER" switch
off.
Figure 13
9

Advertisement

Table of Contents
loading

Table of Contents