Programming The Power Windows - Cadillac 2008 SRX Owner's Manual

Express-Down Window
This feature is on all windows. Press the switch to
the second position and release the switch to activate
the express-down feature. To stop the window as
it is lowering, press down or pull up briefly on the
switch again.
Express-Up Window
This feature is on all windows. Pull the switch up to the
second position and release the switch to activate
the express-up feature. To stop the window as it is
raising, pull up or press down briefly on the switch again.

Programming the Power Windows

If the battery on your vehicle has been recharged,
disconnected, or is not working, you will need to
reprogram each power window for the express-up
feature to work. Before reprogramming, you will need
to replace or recharge your vehicle's battery.
2-18
To program each window, follow these steps:
1. With the ignition in ON/RUN, ACC/ACCESSORY,
or when Retained Accessory Power (RAP) is
active, close all doors.
2. Press and hold the power window switch until the
window is fully open.
3. Pull the power window switch up until the window
is fully closed.
4. Continue pulling the switch up for approximately
two seconds after the window is completely
closed.
The window is now reprogrammed. Repeat the process
for the other windows.
Express Window Anti-Pinch Feature
If any object is in the path of the window when
the express-up is active, the window will stop at the
obstruction and auto-reverse to a preset factory position.
Weather conditions such as severe icing may also
cause the window to auto-reverse. The window
will return to normal operation once the obstruction
or condition is removed.