Table of Contents
Advertisement
4
Press the recording start/stop
button.
Pause recording. (Fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
≥After recording, the fade setting is canceled.
To cancel fading
Select [
] again.
To select the colour for fade in/out
The colour which appears in fading pictures can
be selected.
Press the MENU button, then select
[VIDEO]
[FADE COLOUR]
#
[WHITE] or [BLACK] and press the
center of the cursor button.
≥If you turn off the power, the fade function is
canceled.
≥While the fade in/fade out function is selected,
it takes several seconds to display the image
when you start recording. It also takes several
seconds to pause recording.
≥The thumbnails of scenes recorded using fade
in become black (or white).
Image stabilizer function
This is for reducing image shakes
(jitter) during recording.
Reduces the image shaking (jitter) due to hand
movement when recording.
Rotate the mode dial to select
¬
Press the MENU button, then select
[BASIC]
the center of the cursor button.
To cancel the image stabilizer function
Press the MENU button, then select [BASIC] #
[O.I.S.] # [OFF] and press the center of the
cursor button.
#
≥This function's default setting is [ON].
≥In still picture recording mode, pressing the
PHOTO SHOT button halfway increases the
effect of the image stabilizer function. (MEGA
optical image stabilizer)
≥In the following cases, the image stabilizer
function may not work effectively.
– When the digital zoom is used
– When the unit is shaken greatly
– When you record a moving subject while
tracking it
[O.I.S.]
[ON] and press
#
#
Recording
.
55
Advertisement
Table of Contents
