Note
•
HDMI 1 and HDMI 2 supports HDMI 1.4.
e Network port
Network port
Data input from the network.
•
Side Connectors
a USB 1/ USB 2
Data input into USB storage devices.
Note
•
USB 2 supports the devices of USB 2.0 or
more.
Using Philips EasyLink
Taking full advantage of your Philips EasyLink
HDMI-CEC compatible devices can enhance
the control function and achieve the best
possible results.HDMI-CEC compatible devices
connected through the HDMI connector can be
controlled by a TV remote control.
To enable Philips EasyLink, you need to:
Make sure that each HDMI-CEC compatible
•
device can run normally.
Switch to EasyLink
•
Note
•
EasyLink-compatible device must already be
turned on and is selected as a signal source.
•
Philips does not guarantee its 100%
interoperability with all HDMI CEC devices.
Turn on or off EasyLink
Note
•
Pease do not enable Philips EasyLink if you do
not intend to use it.
1
Press
.
2
Select [TV Settings] > [EasyLink]>
[EasyLink].
3
Select [Off] or [On] and press OK.
Turn on or off the EasyLink
remote control
Note
•
Pease do not enable Philips EasyLink if you do
not intend to use it.
1
Press
.
2
Select [TV Settings] > [EasyLink]>
[EasyLink remote control].
3
Select [Off] or [On] and press OK.
EN-GB
27