Test Procedure - Sharp R-300BW Service Manual

R-300BW

TEST PROCEDURE

PROBLEM
CONDITION
Home fuse or circuit breaker blows when
power cord is plugged into wall receptacle
OFF
Monitor fuse blows when power cord is
CONDITION
plugged into wall receptacle.
Oven lamp does not light when door is
opened.
Oven lamp does not go out when door is
closed.
Oven lamp lights but fan motor and turnta-
ble motor do not operate.
Oven does not go into cook cycle when
Light Up Dial is turned.
COOKING
CONDITION
Oven seems to be operating but little or no
heat is produced in oven load. (Food in-
completely cooked or not cooked at all at
end of cook cycle.)
Oven goes into a cook cycle but extremely
uneven heating is produced in oven load
(food).
Oven does not cook properly when pro-
grammed for variable cooking mode. (Op-
erates properly on Cooking Power HIGH
mode.)
RE RE A B C D E F F G H RE RE CK I CKCK J K
10
CK = Check / RE = Replace