Encore ENRXWI-SG User Manual page 20

Wireless Bridge mode – A pair of APs operating under Bridge mode to act
as the bridge that connect two Ethernet networks or Ethernet enabled clients
together. You must make sure that the SSID and Channel is set the same as
that AP you wish to connect.
Remote Bridge MAC filed: key in the LAN Mac address (NOT wireless
Mac address) of the AP that you wish to get connected.
Multiple Bridge mode – A group of APs which consists of two or more APs
operating under Multiple Bridge mode, that can connect two or more
Ethernet networks or Ethernet enabled clients together.
Note: All APs have to use the same Channel and SSID in order to set a
Multiple Bridge network.
Repeat Mode – It is able to extend the effective range and coverage of the
wireless network. Please make sure the SSID is the same as that AP you
want to extend.
Beacon Interval: To set the period of time in milliseconds that AP sends out a
beacon. Default is 100 milliseconds.
RTS Threshold: To set the size of RTS/CTS packet size. Default is 2432 bytes.
Fragmentation Threshold: To set the number of bytes used for the
fragmentation boundary for directed messages. Default is 2436 bytes.
DTIM Interval: This value indicates the interval of the Delivery Traffic
Indication Message (DTIM). A DTIM field is a countdown field informing
clients of the next window for listening to broadcast and multicast messages.
When the access point has buffered broadcast or multicast messages for
associated clients, it sends the next DTIM with a DTIM interval value. Access
point clients hear the beacons and awaken to receive the broadcast and multicast
messages.
SSID Broadcast: While SSID Broadcast is enabled, all wireless clients will be
able to communicate with the access point. For secure purpose, you may want
to disable SSID broadcast to allow only those wireless clients with the AP SSID
to communicate with the access point.
TX Rates (Mbps): Select one of the wireless communications transfer rates,
measured in megabytes per second, based upon the speed of wireless adapters
connected to the WLAN.
15