Advanced Setting - Encore ENRXWI-SG User Manual

Advanced Setting

This page contains configurations for advanced users, which the change reflects,
the wireless performance and operating modes.
AP Mode: Select one of the AP operating modes for different application of
Access Point.
AP mode – The normal Access Point operating mode which forms a wireless
ESS network with its wireless clients.
AP Client mode – Acts as an Ethernet-to-Wireless Bridge, which allows a
LAN or a single computer station to join a wireless ESS network through it.
You must make sure SSID and Channel is set the same as that AP you wish
to connect.
Remote AP BSS ID: key in the LAN Mac address (NOT wireless Mac
address) of the AP that you wish to get connected. Please note that if you
leave Mac address as 000000000000, then you will get connected by the
SSID that is set in you AP.
Figure 17. Advanced Setting
14