Table of Contents
Advertisement
this way, you can set HDMI 1 input's Movie picture mode to use different
settings than the HDMI 2 input's Movie picture mode and Antenna TV's Movie
picture mode. Use Reset picture settings, described below, to return the input's
selected picture mode to its original values.
•
Local contrast – Only on select models : Sets the amount of dimming multiple
"local" areas of the screen's backlight intensity. This setting can make dark
areas darker without affecting the brightness of light areas. This option is
disabled when Game mode is enabled.
•
Dynamic contrast – Only on select models : Automatically adjusts the backlight
level to achieve the optimum contrast and prevent excessive differences
between light and dark areas of the screen. This option is disabled when Local
dimming / Local contrast is enabled.
•
Backlight - Adjusts the overall light intensity of the screen. On some models, this
option is disabled when Dynamic contrast is enabled.
•
Brightness – Adjusts the dark level of the black areas of the picture.
•
Contrast – Adjusts the white level of the light areas of the picture.
•
Sharpness – Adjusts the sharpness of the edges of objects in the picture.
•
Color – Adjusts the intensity of colors in the picture. A setting of 0 removes all
color and displays a black and white picture.
•
Tint – Adjusts the color balance from green to red to obtain accurate colors in
the picture.
•
Color temperature – Adjusts the overall colors in the picture from Normal to
slightly more bluish (Cool) to slightly more reddish (Warm).
•
Action smoothing – Only on select models: Adjusts the amount of action
smoothing applied to the video signal. A higher setting results in more
smoothing, but can cause undesirable picture artifacts in certain types of
content . Each Picture mode has a different Action smoothing default setting.
80
Advertisement
Table of Contents
