To Use The Stand - TCL Roku TV 5 Series Manual

•
55" model
•
65" model
The VESA number is the horizontal and vertical measurement of the mounting holes.
For example, 100 x 200 indicates that the mounting holes are spaced 100mm
horizontally and 200mm vertically.
Follow the directions supplied with the wall mount to mount the TV to the wall.
Caution : Your wall mount must be able to bear a minimum of five times the TVs net
weight to avoid damage.
The wall mount bracket and the screws are not included
Note :

To use the stand

Your TCL Roku TV comes without the stands attached so that you can choose to use
the stands or mount your TV to a wall using a wall mount (sold separately). If you
want to mount your TV to the wall, don't attach the stand legs.
A – Place the TV face down on a soft, cushioned surface on a table. The bag the TV
was packed in makes a good cushion. Position the TV so that the stand, when
attached, will hang over the edge of the table.
B – Take out the two plastic covers from the stand holes at the bottom of the TV.
C – Put the column of the stands into the TV, align the stands with the screw holes
located on the TV.
D – Secure the stands to the TV with four (4) screws.
VESA 200 x 200, M6 x 12mm screws
VESA 400 x 200, M6 x 12mm screws
7