Key Features - Encore ENH905-NWY User Manual

For network connection:
The switch can use the following types of cabling:
10BASE-T Category 3, 4 or 5 UTP/STP
100BASE-TX Category 5 UTP/STP
Category 5 cable is preferred to use with this product in structured wiring
environments. This will ensure correct operation of all ports at 10Mbps or
100Mbps.

2.2 Key Features

The switch provides the following key features:
Complies with 10BASE-T specifications of the IEEE802.3 standard
Complies with 100BASE-TX specifications of the IEEE802.3u standard
All RJ-45 ports for 100BASE-TX and 10BASE-T connectivity
Supports NWay protocol for speed (10/100Mbps) and duplex mode (Half/Full)
auto-detection
Supports MDI/MDI-X auto crossover
Supports full and half duplex operation on all ports
Supports back-pressure (half duplex) and flow control (IEEE 802.3x)
Wire-speed packet filtering and forwarding rate
Store-and-forward architecture filters fragment & CRC error packets
Supports 2K MAC address entries in whole system
128KB buffer memory
Supports extensive LED indicators for network diagnostics
External power adapter
FCC Class A, CE
4