Password; Tcp/Ip Settings; Lan Interface - EnGenius EOC-3220 User Manual

11g Wireless Outdoor Client Bridge/AP
Click on the Save button to save the current settings to a file on the local disk.
Click on the Browse button to select the settings file and then click on the Upload
button to load the previously saved settings.
Click on the Reset button to reset the device to its factory default settings. Click
Restart to reboot the device.

5.2.7 Password

Click on the Password link under the Management menu. This option allows you to
create a user name and password for the device. By default, this device is configured
without a user name and password. For security reasons it is highly recommended
that you create a user name and password.
Enter a user name into the first field.
Enter a password into the New Password field and then re-type the password into
the Confirmed Password field. Then click on the Apply Changes button.
By clicking on the Reset button, the user name and password fields will become
blank indicating that the username and password has been disabled.

5.3 TCP/IP Settings

5.3.1 LAN Interface

Click on the LAN Interface link under the TCP/IP Settings menu. Using this option
you may change the IP address of the device as well as toggle the DHCP and
802.1d spanning tree feature.
Click on the TCP/IP Settings link on the
navigation drop-down menu. You will then see
the LAN Interface option. This option is
described in detail below.
Version 1.36
36