Access Point To Bridge/Bridge Router - EnGenius EOC-3220 User Manual

11g Wireless Outdoor Client Bridge/AP

3.2 Access Point to Bridge/Bridge Router

1 Enter the default IP address (192.168.1.2) of the bridge into the address bar of
the web-browser.
2 By default, a user name and password has not been configured. If you have
configured a user name and password, please enter them into the field to
continue
3 Once you have logged in, click on the Operation Mode link under the
Management menu.
4 Since this device is currently in Access Point mode, the AP radio button will be
selected by default.
Select the Bridge or Bridge Router radio button to and then click on the Apply
5
Change to switch the operation mode to Bridge.
6 Wait for about 1 minute and the device will automatically restart into Bridge
mode.
Version 1.36
13