3D Functions; Control The Projector Through The Local Area Network - ViewSonic LS700HD User Manual

Table of Contents

Advertisement

3D functions

This projector also comes with 3D functions that offer greater depth and immersion
when viewing 3D movies, videos, sports, and games. You will need a pair of 3D
glasses when viewing 3D images and videos.
If the 3D signal comes from an HDMI 1.4a compatible device, this projector will look
for a 3D Sync data signal. Once detected, the projector will automatically switch to
3D projection. Under other circumstances, you may need to manually select the 3D
Sync format to ensure the proper projection of 3D images.
Selecting 3D Sync formats:
1.
Use the remote control or control panel to open the OSD menu, select Advanced >
3D Settings menu.
2.
Press [Enter] to bring up the 3D Settings page.
Once 3D Sync function has been activated:
• Brightness of the projected image will be reduced.
• Color modes cannot be adjusted.
• Zoom functions can only enlarge the image to a limited degree.
If the 3D image has been severely inverted, you may set the 3D Sync Invert function to [Invert]
to correct this problem.

Control the projector through the local area network

This projector supports Crestron
network menu are finished, the projector can be managed on the computer with the
browser when the computer and the projector are correctly connected to the same local
area network.
Configure the wired local area network
If you are in a DHCP environment:
1.
Connect one end of the RJ45 cable to the RJ45 local area network input jack of the
projector, and connect the other end to the RJ45 port.
2.
Open the OSD menu and enter the Advanced > Network Settings.
3.
Select DHCP and then press / to select On.
4.
Press  to select the Apply and then press [Enter].
5.
Please wait for about 15-20 seconds and then re-enter the page of the wired local
area network. The IP address, subnet mask, default gateway and DNS server
settings will be displayed. Please remember the IP address displayed in the IP
address.
If the IP address still does not display, contact the network administrator.
software. After correct settings in the wired local area
®
(Example of connection)
37

Advertisement

Table of Contents
loading

Table of Contents