Fine-Tuning Of Image Quality In User Modes - ViewSonic LS700-4KP User Manual

Fine-tuning of image quality in user modes

You may use several user-defined functions if the projector detects certain signal
types. You can make adjustments to these functions based on your needs.
Adjusting Brightness
Enter Image Setting > Brightness menu and then
press /.
The higher the value, the brighter the image. And
lower the setting, darker the image.
Adjusting this control allows the black area of the
image to appear just as black to reveal details within.
Adjusting Contrast
Enter Image Setting > Color Temp menu and then press /.
The higher the value, the greater the contrast. After
adjusting Contrast, this function may be used to
set the peak-white level that matches the input
signal and observed environment of your choice.
Selecting a Color Temperature
Enter Image Setting > Color Temp menu, and then press [Enter].
Options available to Color Temperature settings will depend on the choice of the
signal type.
1. 6500K: White colors in the image will be provided with a light red undertone.
2. 7500K: Maintains a normal white color tone.
3. 9300K: Provides the highest color temperature.
4. User: Customize.
Adjusting Tint
Enter Image Setting > Tint menu and press / and adjust the value.
The higher the value, the more reddish the picture becomes. The lower the value, the
more greenish the picture becomes.
This function is only available when the input signal is Video.
Adjust Saturation
Enter Image Setting > Saturation menu and press /.
The lower the set value, the smaller the color saturation. If the value is set too high,
the image color will be too strong which will produce an untrue image.
This function is only available when the input signal is video.
Adjusting Sharpness
Enter Image Setting > Sharpness menu and then press /.
Higher settings produce sharper images. The lower the value, the softer the picture
becomes.
This function is only available when the input signal is video.
33