Headlamp Adjustment - PEUGEOT 301 Handbook

Lighting and visibility

Headlamp adjustment

To avoid causing a nuisance to other road
users, the height of the headlamp beams
should be adjusted according to the load in the
vehicle.
Depending on the version, this adjustment can
be carried out using the control located:
- Under the bonnet.
- To the left of the steering wheel
Under the bonnet
F Raise the bonnet to access the control (one
per headlamp).
F Turn the control to adjust the height of the
headlamp beam.
54
To the left of the steering wheel
1 or 2 people in the front seats.
0
- 5 people.
1 5 people + maximum authorised load in
the boot.
- Driver on their own + maximum authorised
load in the boot.
The higher number positions can be used,
but may limit the area illuminated by the
headlamps.
The initial setting is position "0".
Wiper control stalk
Front wipers
Raise or lower the control to the desired
position to change the wiping speed.
Fast wiping (heavy rain).
Normal wiping (moderate rain).
Intermittent wiping (proportional to
the speed of the vehicle).
Off.
Single wipe (press down and
release).