Visibility
Headlamp adjustment
To avoid causing a nuisance to other road users, the headlamp beams should be adjusted
according to the load in the vehicle.
This adjustment can be carried out using the control located:
-
under the bonnet,
-
below and to the left of the steering wheel (depending on version).
Under the bonnet
F Raise the bonnet for access to the control
(one per headlamp).
F Turn the control to adjust the height of the
headlamp beam.
86
To the left of the steering wheel
0
1 or 2 people in the front seats.
-
5 people.
1
5 people + maximum authorised load in
the boot.
-
Driver + maximum authorised load in
the boot.
The higher number positions can be used,
but may limit the area illuminated by the
headlamps.
The initial setting is position "0".
Travelling abroad
The design of the dipped beam
headlamps allows, without modification,
driving in a country that drives on the
other side of the road to the country in
which your vehicle was sold.