Braun BNT 400B Manual page 6

7 To turn off
Press the power button to turn off . Device will also shut off automatically after 30 seconds of no use .
How to use the No touch setting to take a food/bath temperature
1 Remove protective cap
2 Power on
Press and release the power button once . Backlight will come
on and the start-up sequence begins .
NOTE: Make sure to remove the protective scanner cap before
taking a measurement .
Select food & bath
3
temperature mode
Press and release the food & bath
temperature mode button . A beep will
sound, the food & bath icon ( ) will be
displayed, the screen backlight will turn
blue and three dashes will show on the
screen indicating the thermometer is
ready to take a temperature .
Position
4
Position device up to 6 cm away from the bath water or food .
Note: When measuring food or bath temperature the
thermometer must be aimed directly at the food or bath
water . DO NOT aim at sides of container holding the liquids
or food . DO NOT touch liquid or food with the thermometer .
8
Take temperature
5
Press the temperature button (you can press and hold the button or press and
release it .) The display will show a dashed line animation while it takes a reading .
Once the reading is complete, the display will show the temperature reading .
Read temperature
6
Remove the device and read the temperature .
Changing the temperature scale
Open battery compartment and remove
1
the batteries .
°C / °F switch is accessible in
2
the battery compartment .
Slide switch to °C or °F to set preferred
3
temperature scale .
Replace the batteries and close the
4
battery door .
Celsius Fahrenheit
9