Table of Contents
Advertisement
AFTER INSTALLATION CHECK LIST
23.6 FINISHING INSTALLATION
a. The refrigerant piping lines, electrical cables and condensate drain hose
are lumped together. The drain hose is at the bottom of the lump.
b. The wall passage hole is properly sealed.
23.7 TESTING RUNNING
a. The cooling cycle is tested
At least one complete cooling cycle of unit operation is observed.
b. There is no any abnormal noise or vibration from the outdoor unit during operation.
c. There is no any abnormal noise or vibration from the indoor unit during operation.
d. The wired controller operates correctly
23.8 CUSTOMER GUIDANCE
a. The correct operation of the air conditioner has been explained to the customer
including the following points:
Starting and stopping method
Operation mode adjustment
Temperature adjustment
Fan speed adjustment
Timer functions
Other control functions of wired controller
Filter removal and cleaning and replacement
b. The owner's and installation manuals have been given to the customer.
51
Advertisement
Table of Contents
