Starting And Operating; Engine Break-In Recommendations - Dodge DURANGO Features Manual

16

ENGINE BREAK-IN RECOMMENDATIONS

The following tips will be helpful in obtaining
optimum performance and maximum durability
for your new SRT vehicle.
This break-in occurs mainly during the first
500 miles (805 km) and continues through the
first oil change interval.
It is recommended that the operator observe
the following driving behaviors during the new
vehicle break-in period:
0 to 100 miles (0 to 161 km):
Do not allow the engine to operate at idle for

an extended period of time.
Press the accelerator pedal slowly and no

more than halfway to avoid rapid accelera-
tion.

STARTING AND OPERATING

Avoid aggressive braking.

Drive with the engine speed below

3,500 RPM.
Maintain vehicle speed below 55 mph

(88 km/h) and observe local speed limits.
100 to 300 miles (161 to 483 km):
Press the accelerator pedal slowly and no

more than halfway to avoid rapid accelera-
tion in lower gears (FIRST to THIRD gears).
Avoid aggressive braking.

Drive with the engine speed below

5,000 RPM.
Maintain vehicle speed below 70 mph

(112 km/h) and observe local speed limits.
300 to 500 miles (483 to 805 km):
Exercise the full engine RPM range, shifting

manually (paddles or gear shift) at higher
RPM when possible.
Do not perform sustained operation with the

accelerator pedal at wide open throttle.
Maintain vehicle speed below 85 mph

(136 km/h) and observe local speed limits.
For the first 1,500 miles (2,414 km):
Do not participate in track events, sport

driving schools, or similar activities.
NOTE:
Check engine oil with every refueling and add if
necessary. Oil and fuel consumption may be
higher through the first oil change interval.
Running the engine with an oil level below the
add mark can cause severe engine damage.