15,000 btu/h wall-mounted indoor unit for mxz-b multi-zone heat-pump systems (2 pages)
Summary of Contents for Mitsubishi Electric SEZ-KD NA Series
Page 1
M-NET Interface MAC-399IF-E Photo Descriptions Enables centralized and individual control of M series and S series models with new -A control using M-NET. TO BE CONFIRMED Applicable Models MSZ-A09/12/15/17/24/NA MSZ/Y-GA24NA MSY-A15/17/24NA SEZ-KD**NA SLZ-KA MSZ-FD09/12NA MSZ-GE09/12/15/18NA MSZ/Y-D30/36NA Specifi cations Power 12VDC (supplied from indoor unit) Operating conditions Indoor only (ambient temperature: 0 to 40℃...
Contents 1. Safety Instructions .......................... 2 2. Before Installation ........................... 3 3. Mounting the M-NET Interface Unit ....................4 4. Setting the Switches ........................5 5. Connecting the M-NET Interface to indoor unit ................6 6. Connecting the M-NET Interface, the Power Supply, and the ME Remote Controller ....7 7.
2. Before Installation 2.1. How to Use the M-NET Interface Caution When using a packaged air conditioner (city-multi) system remote controller, you cannot register packaged air condi- tioners and room air conditioners in the same group. In this case, register the Packaged and room air conditioner in different groups.
3. Mounting the M-NET Interface Unit The M-NET Interface unit should be placed in a location where the 5-core connecting cable from the interface can reach an indoor unit. Do not extend the 5-core connecting cable. This will cause the device to malfunction. Mount the interface unit securely to a pillar or wall using 2 or more screws.
4. Setting the Switches If the system is not configured correctly, the unit will not function properly. You may be unable to control the functions of the indoor unit from the System Controller/ME Remote Controller or functions not available on the indoor unit could appear on the System Controller/ME Remote Controller display.
6. Connecting the M-NET Interface, the Power Supply, and the ME Remote Controller • When connecting the unit to a system controller or ME Remote Controller, connect the transmission line of the M-NET to the control signal terminal. Connect the 2-core connection wrings A to A1/B1 or A2/B2 (they can be connected to either). •...
7. Notes Regarding Use Please read this information carefully before attempting a test run. The following control information should be thoroughly explained and provided to the users of this device. (Please provide these instructions to the user once the installation is complete.) * This M-NET Interface operates M/P/S Series using the controls of a packaged air conditioner (city-multi), but there are several limitations imposed as a result of the functional differences between M/P/S Series and packaged air conditioners.
8. Table of Functions Activated from the ME Remote Controller/System Controller Functions operated from the wireless remote controller that came with M/P/S series. [Symbol] : Available/ : Available with limitations on the display/×: Non-available/–: Non-applicable (no functions) ME remote Functions *1 G-50A BACnetl/F LM-AP...