Setting And Using The Alarm/Operating The Alarms - iHome iBT290 Instruction Manual

Setting and Using the Alarm
This unit has a dual alarm system so you can set two separate alarms to di erent alarm times
and wake to sources.
Setting the Alarms
Note: Alarm 1 and Alarm 2 are set the same way; Alarm Button below means the button (
or ) for whichever alarm you are setting.
1. Press and hold the
lower part of the display and a beep sounds. Press and release the – or + Button to set the
alarm time (press and hold for faster setting). Remember to set the correct AM or PM time.
2. Press and release the Alarm Button again to confirm the set alarm time. The current wake
schedule will flash. Press and release the – or + Button as needed to select "7 DAYS" (alarm
sounds every day), "5 DAYS" (alarm sounds on week days) or "2 DAYS" (alarm sounds only
on weekends).
3. Press and release the Alarm Button again to confirm the alarm schedule. The wake to icon
and the current alarm source will flash. Press the – or + Button as needed to select to set
the alarm wake-to source: BT, FM radio or Tone.
To Wake to Bluetooth: You will wake to the currently linked Bluetooth device. If no device is
detected, the alarm will default to buzzer.
To Wake to FM radio: The default wake to source is the current FM radio station. Press the
Alarm Button to confirm Radio as alarm source, then press and release the – or + Button to
set a di erent station (press and hold to scan to the next clear station). To wake to a preset
station, press the
for details on setting presets).
To wake to Tone: Press the Alarm Button to confirm Tone as alarm source, then press and
release the – or + Button as needed to preview and cycle through the four tones.
4. Press and release the Alarm Button again, then press and release the – or + Button to
adjust the alarm volume. Note that alarm volume is stored separately from standard
volume.
or Button until the alarm icon flashes, the alarm time flashes on the
Play/Pause/Preset Button to cycle to the desired preset (see page 8
Using the
7
iBT290