Chevrolet Captiva Owner's Manual page 81

Chevrolet Captiva Owner Manual (GMNA-Localizing-MidEast LHD-
14860584) - 2021 - CRC - 5/18/20
1. Trip Computer Information Option
2. Vehicle Information Setup Option
3. Multimedia Information Display Option
4. Bluetooth Telephone Information Display
Option
5. Display Zone
6. General Odometer
Instrument Cluster Control Button
The Type-II trip computer display screen can
be controlled with the buttons on the
steering wheel. Only when the ignition
switch is turned to ON can the instrument
cluster be controlled.
1. Option switch button
This button is used to switch among the
different display screens.
2. Up/down selection button
Pull the button up or down to make a
selection or adjustment.
3. Confirm button (OK)
This button is used to confirm the setup
or to clear a trip mileage or average fuel
consumption. The confirm button can be
operated in two ways:
short press: a press of less than
two seconds
long press (press and hold): a press
of equal to or more than
two seconds
Trip Computer Information Option
Choose this option to indicate driving
information such as odometer, average fuel
consumption, current vehicle speed,
instantaneous fuel consumption, driving
time, fuel range, tire pressure, etc. Pull the
up/down selection button to switch among
the following interfaces:
Instruments and Controls
Interface 1 Trip Mileage 1/Average Fuel
Consumption
The first trip mileage and the average fuel
consumption within the recent driving
distance are shown.
Average fuel consumption is shown in
L/100 km and can help the driver develop
good driving habits.
In different driving modes, the reference
average fuel consumption is different. These
driving modes include driving in an urban
area, high-speed driving, driving at different
constant speeds, acceleration/deceleration,
driving at the same speed and with different
gears engaged, etc.
81