EVGA Z270 Stinger User Manual page 11

EVGA Z270 Stinger (111-KS-E272)
1. Removable BIOS LED
a. RED: BIOS chip is detected and active
b. This BIOS chip can be removed and replaced while the motherboard is
powered off. Please contact EVGA Support for any concerns with the
BIOS chip, and never remove the chip while the PC is powered on.
2. 5VSB
a. WHITE: Voltage detected (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
3. VCC
a. RED: Voltage detected (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
4. VSM
a. YELLOW: Voltage detected (Does not mean PSU is outputting in-spec,
only that this specific voltage is detected)
5. M.2 Key-M Activity
a. RED: M.2 detection/activity.
i. Some devices do not have full activity detection support; for
ii. Rather
b. OFF: No device attached.
6. M.2 Key-E Activity (Bluetooth)
a. RED: Bluetooth activity.
b. OFF: No device attached.
7. M.2 Key-E (WiFi)
a. RED: WiFi activity.
i. Rather
b. OFF: No device attached.
8. Audio Trace
a. WHITE: This LED backlights the isolated Audio traces. When the
LED is on, it merely shows the PC is on and the light is not disabled in
BIOS. The lights may be enabled/disabled in BIOS under the option
"Audio Backlight".
example, the LED will turn on when a SM951 drive is attached
and blink while accessing. However, a XP941 drive does not
support that function.
than being
detected/active will blink, this is specific to some devices.
than being
detected/active will blink, this is specific to some devices.
solid ON, some
solid ON, some
devices when
devices when
- 11 -