Connecting And Charging The Player; Connecting And Disconnecting The Player From Your Computer; Charging The Battery; Video Conversion - Ematic EM404CAM User Manual

2.0 Connecting and Charging the Player

2.1

Connecting and Disconnecting the Player from Your Computer

To connect your player to your computer, turn on the player and plug the
small end of the included USB cable into the player, and the large end into
the computer‟s USB port.
The first time you connect the player to your computer; your computer will
detect it and automatically install any necessary drivers. When it has
finished, the player will appear in My Computer as EMATIC MP3
To safely disconnect the player from your
computer, click the green arrow in the system
tray (the area by the clock on your task bar),
which will display a list of attached USB
devices. Highlight the player in the list, and
click „Stop.‟ Windows will display a message
when it is safe to remove the player.
2.2

Charging the Battery

The player has a built-in battery that must be charged before the player
can be used.
1. Turn on the player.
2. Connect the player to a turned-on
computer using the USB cable.
3. Let the player charge for 4 hours before initial use. You can charge
the player for 2 hours there after.

3.0 Video Conversion

3.1

Installing Video Conversion Software

Before watching videos on your player they
must first be converted to a format that the
player recognizes. This conversion can be
done with Windows software that came with
your player. Follow these steps to install the
software:
1. Place the included CD into your computer's disc drive.
E4 Series User Manual
Any USB device that
stores data (e.g. flash drives,
cameras, and media players)
should always be
disconnected from your
computer using this method!
This player will only
play videos that have been
converted to a compatible
video format.
Page 4 of 27