Basic Operations; Turning The Player On And Off; The Desktop - Ematic EM404CAM User Manual

7.0 Basic Operations

7.1

Turning the Player On and Off

On: To turn the player on, slide the player's
on/off switch as far as it will go in the direction
away from the USB port and hold it there until
the display turns on. Alternatively, you can
also turn the player on by pressing and
holding the CAMERA button until the display
turns on.
Off: To turn the player off, slide the player's on/off switch as far as it will go
in the direction away from the USB port and hold it there until the display
turns off. Alternatively, you can also turn the player off by pressing and
holding the CAMERA button until the display turns off.
By default, if the player is left idle for three minutes it will automatically turn
itself off. To select a different duration before the device turns itself off, or
to make it so the device doesn‟t turn itself off at all, please read "System
Settings" on pg. 23.
Note: The unit will also turn itself off if the battery charge becomes too
low.
7.2

The Desktop

The player has many functions, or modes,
such as playing music/movies and
shooting photos or video. When the player
is turned on it displays the Desktop (Main
Menu), which can be used to enter any of
these modes. Select a mode by tapping it
with your finger (or the stylus). You can get
back to the Desktop from most modes by
pressing the MENU/EXIT button or by
tapping on the desktop icon in the lower-
right corner of the screen.
From the desktop, you can directly access
all the files on an inserted microSD card,
by entering the Explorer mode.
E4 Series User Manual
Pay special
attention to whether these
instructions indicate whether
to press or press and hold a
button!
Page 11 of 27