I/O Board - Lenovo ThinkCentre M70q Gen 2 Hardware Maintenance Manual

Removal steps

I/O board

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the following parts in order, if any:
• "Computer cover" on page 67.
• "Hard disk drive and hard disk drive bracket" on page 68.
• "PCIe card and PCIe converter (for M90q Gen 2 only)" on page 70.
Removal steps
Note: Depending on the model, the I/O board might look differently from illustration below.
. 85
Chapter 6 Hardware removal and installation