Table of Contents
Advertisement
Parameter
Explanation
SW PREF
(ON/OFF PREFERENCE)
MEM PREF
(MEMORY PREFERENCE)
MEM, SYS:
CTL1 PREF
settings of each memory or the settings
(CTL1 PREFERENCE)
common to the entire unit.
CTL2 PREF
(CTL2
PREFERENCE)
EXP PREF
(EXPRESSION PREFERENCE)
Specifies how the A and B channel
equalizers are connected.
PARA
(PARALLEL)
and B are connected to channels A and B
respectively.
INPUT A
INPUT B
STRUCT
SERIES:
(STRUCTURE)
are connected in series.
INPUT A
INPUT B
The input is mixed to mono, and the same
signal is output from A and B.
& For details, refer to "About STRUCT
(p. 11)
Choose whether to use the
:
INPUT/OUTPUT jacks A
A
OUTPUT A
B
OUTPUT B
The A and B channel equalizers
OUTPUT A
A
B
OUTPUT B
(STRUCTURE)
.
Parameter
Explanation
Changes the center frequencies of the
sliders.
30.800.12K:
3.2k/6.4k/12.8k (as printed on the panel)
TYPE
32/1k/16k:
k/8k/16k
28/880/14k:
28/55/110/220/440/880/1.75k/3.5k/7k/14k
Specifies whether the equalizer settings
are shared by channels A and B.
OFF:
LINK
independently.
ON:
settings.
EXT FROM
(MEMORY
Specifies the extent of memory switching
EXTENT FROM)
(MEMORY EXTENT FROM–TO).
EXT TO
MAN, M-1–
(MEMORY
EXTENT TO)
Specifies the MIDI receive channel.
RX CH
If this is "OFF, " MIDI messages are not
(MIDI RECEIVE
received.
CHANNEL)
1–16, OFF
Specifies the MIDI transmit channel.
TX CH
If this is "OFF, " MIDI messages are not
(MIDI TRANSMIT
transmitted.
CHANNEL)
1–16, RX (RECEIVE), OFF
Specifies whether program changes are
"
PC IN
received (ON) or not received (OFF).
Overall Settings (Menu)
30/60/120/200/400/800/1.6k/
32/63/125/250/500/1k/2k/4
Channels A and B can be set
Channels A and B use the same
127
9
Advertisement
Table of Contents
