Advertisement
Setting Astronomic On/Off Events
Access the Astro Events screen to configure Astronomic ON/OFF events. One Astronomic ON event (at sunset) and/or one
Astronomic OFF event (at sunup) can be enabled for selected days of the week. Follow this procedure to set Astro ON/ OFF Events
(if no astronomic events need to be set press MODE to move to the next mode selection).
Press MODE to advance until SET ASTRO
1.
already active). The display also shows the ON@ icon and the LOAD icon above the ON/OFF button.
2.
If an event is not set the time display will show - - - -.
3.
Press DAY. The screen displays SUNSET and the days of the week.
If the desired days for this event
are
MON-SUN
MON-FRI
SAT-SUN
SET EACH DAY INDIVIDUALLY
On the display, the day of the week
being set is flashing.
4.
Press – to eliminate this event or press + to keep this event for the selected day.
5.
Press DAY to move to the next day of the week repeat step 4.
6.
When all the days are set, press ENTER/NEXT to save.
7.
The display changes to SET ASTRO
8.
If an event is not set the display will show - - - - .
9.
Press DAY. The screen displays SUNUP and the days of the week.
If the desired days for this event are Then
MON-SUN
MON-FRI
SAT-SUN
SET EACH DAY INDIVIDUALLY
On the display, the day of the week
being set is flashing.
10. Press – to eliminate this event or press + to keep this event for the selected day.
11. Press DAY to move to the next day of the week repeat step 10.
12. When all the days are set, press ENTER/NEXT to save.
13. Press MODE to save and exit. The procedure is complete.
ON/OFF EVENTS
Then
Press ENTER/NEXT to save. Go to step 7.
Press DAY once and then press ENTER/NEXT to save. Go to step 7. .
Press DAY twice and then press ENTER/NEXT to save. Go to step 7.
Press DAY three times and the MON icon should flash.
Go to step 4.
ON/OFF EVENTS
SUNUP, the OFF@ icon.
Press ENTER/NEXT to save. Go to step 13.
Press DAY once and then press ENTER/NEXT to save. Go to step 13.
Press DAY twice and then press ENTER/NEXT to save. Go to step 13.
Press DAY three times and the MON icon will flash.
Go to step 10.
SUNSET icons appear on the display (if this selection is not
Advertisement
