Table of Contents
Advertisement
2. C
(
ONTROLS
CONT
2.2 I
NTEGRATED
All units are equipped with an integrated control, located under the unit, on the recessed side
of electrical compartment. Plug the unit. Use the push button (1) to control the unit. The LED (2)
will then show on which mode the unit is in.
VD0207
Refer to table below.
LED C
OLOR
AMBER
GREEN
NO LIGHT
If a problem occurs during the unit operation, its integrated control LED (2) will blink. The color
of the blinking light depends on the type of error detected. Refer to Section 4 Troubleshooting
on last page for further details.
NOTE: When using main control, the integrated control must be turned off.
2.3 O
PTIONAL
For more convenience, these units can also be controlled using an optional main control.
Only one main control can be connected per unit.
NOTES: 1. The integrated control must be turned OFF to use an optional main control.
2. If an optional auxiliary control is used, its activation will override the main
control operation.
For more information about your unit controls, refer to the Main and auxiliary wall controls
user guide (included with your unit and also available at www.broan.com).
'
)
D
C
ONTROL
2
B
OTTOM OF THE
U
NIT IS
M
A
AIN AND
UXILIARY
1
U
NIT
R
ESULTS
U
L
NIT IS ON
OW SPEED
U
H
NIT IS ON
IGH SPEED
O
FF OR CONTROLLED BY A MAIN CONTROL
C
ONTROLS
5
Advertisement
Table of Contents
