How To Join The Product Assembly To The Wall To Protect The Set Tumbling - LG 42LC2D Series Owner's Manual

HOW TO JOIN THE PRODUCT ASSEMBLY TO THE
WALL TO PROTECT THE SET TUMBLING
- Set it up close to the wall so the product doesn't fall over when it is pushed backwards.
- The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the prod-
uct doesn't fall over when it is pulled in the forward direction. It will prevent the product from falling forward
and hurting people. It will also prevent the product from damage caused by fall. Please make sure that children
don't climb on or hang from the product.
For 42/50PC1D *
1
1
Use the eye-bolts or TV brackets/bolts to fix the set to the wall as shown in the picture.
(If your set has the bolts in the eye-bolts position before inserting the eye-bolts, loosen the bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2 Secure the wall brackets with the bolts (not provided as parts of the set, must purchase separately) on the
wall. Match the height of the bracket that is mounted on the wall.
3
3 Use a sturdy rope (not provided as parts of the set, must purchase separately) to tie the set. It is safer to
tie the rope so it becomes horizontal between the wall and the set.
!
NOTE
When moving the set to another place undo the ropes first.
G G
Use a set holder or a cabinet that is big and strong enough for the size and weight of the set.
G G
To use the set safely make sure that the height of the bracket that is mounted on the wall is same as
G G
that of the set.
2
3
For 32/37/42LC2D *
1
2
15