Sony NUA-BK10 Instructions For Use Manual page 14

• Attach the unit with the monitor stand
attached
Caution
Although the VESA mount screw holes on
either the left or right side of the monitor's
rear can be used, both sides cannot be used
at the same time to mount multiple IP
converters.
To use the monitor stand to
secure the unit
Remove the monitor stand, and use it to
secure the monitor bracket between it and
the monitor.
1
Place the monitor face down on a soft
cloth.
2
Remove the screws that secure the
monitor stand, and remove the monitor
stand.
3
Align the M4 screw holes on the
monitor bracket with the M4 screw
holes on the monitor's rear, insert the
spacers in the M4 holes on the other
side, and use the screws to secure the
monitor stand back onto the monitor.
6
Installation
GB
M4
After attachment, place the monitor in
an upright position before mounting
the IP converter (page 7).
To attach the unit with the
monitor stand attached
Align the M6 screw holes on the monitor
bracket with the M6 screw holes on the
monitor's rear, and secure it with the
supplied screws (M6×12). You can attach
the monitor bracket with the monitor stand
attached.
M6
Spacers