Sony NUA-BK10 Instructions For Use Manual page 13

Unit Components
IPC bracket
Attach this to the bottom of the IP
converter.
Monitor bracket
Attach this to the monitor.
Spacers (2)
Use these when securing the unit to the
monitor using the monitor stand.
Installation
Attaching the IPC Bracket
1
Remove the screws that secure the feet
(4) at the bottom of the IP converter,
and remove the feet.
2
Use the screws removed in step 1 to
secure the IPC bracket to the IP
converter.
When mounting to the monitor, attach
the IPC bracket onto the IP converter
with the front panel of the IP converter
facing up and the connector panel
facing down.
Attaching the Monitor
Bracket
Attach the bracket using one of the
following methods.
• Use the monitor stand to secure the unit
Unit Components / Installation
5
GB