Figure 102. Installing the M.2 BOSS riser
Next steps
Follow the procedure listed in
Removing the M.2 BOSS card from the M.2 BOSS riser
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3.
Removing the M.2 BOSS
About this task
Holding the blue tag, pull the M.2 BOSS card away from the M.2 BOSS riser.
After working inside your system
Safety instructions
Before working inside your system
riser.
on page 26.
on page 25.
on page 26.
Installing and removing system components
101