Battery Disposal; Specifications - Husky HSK012HD User's Manual & Warranty Information

HSK012HD MAN ENGL 090105

Battery Disposal:

This unit contains a maintenance-free, non-spillable, sealed lead-
acid battery. This battery is fully recyclable and should be accept-
ed at any location that accepts common automotive starter batter-
ies. Examples of places that accept these batteries are: County or
municipal recycling drop-off centers, scrap metal dealers and retail-
ers who sell automotive replacement lead acid starter batteries. For
more information on recycling this battery, call toll-free (877) 288-
7722.
CAUTION: THIS PLUG USES AN 8 AMP FUSE. FOR CONTINUED PRO-
TECTION AGAINST RISK OF FIRE, REPLACE FUSE ONLY WITH
SAME TYPE AND RATING.
T0 R F
EPLACE USE
1. Remove plug from accessory receptacle. Remove the gold cap by turnng coun-
terclockwise and lifting off.
2. Remove center pin and spring. Remove fuse.
3. Replace fuse with same type and size fuse (8 amp).
4. Replace center pin and spring inside plug.
5. Replace gold cap by turning clockwise onto plug.

SPECIFICATIONS

Model No . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HSK012HD
Boost Ampere . . . . . . . . . . . . . . . . . . . 400 Instantaneous Cranking Amps
Battery Type . . . . . . . . . . . . . . . . . . . .12 Volt, 17AH Sealed, Rechargeable
Jumper Cables . . . . . . . . . . . . . . . . . . . . . . . .Heavy Duty, Welding Cable
Area Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . White LEDs
DC Charging Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 Volt DC
AC Charging Adapter . . . . . . . . .120 Volt AC (700mA, 12 Volt DC Output)
12 Volt Outlet Output . . . . . . . . . . . . . . . . . . . . . . . . . .Overload Protection
9/1/05 5:42 PM
:
Page 9
Non-Spillable, Lead-Acid
9